Tech Deck The Berrics X-Connect Park Creator: Setup and Play Guide

What you are actually building

The Tech Deck The Berrics X-Connect Park Creator is a folding mini skatepark, not a fixed table-top ramp. The 30-inch-wide base holds ramps and obstacles, and it transforms through 5 levels by adjusting the base and folding side panels. That means your first decision is not which trick to try, but which park shape you want to skate today.

Because the whole thing folds back into a container with a handle, you can build it at the kitchen table, break it down, and rebuild a different layout somewhere else. Treat setup as a quick, repeatable routine rather than a one-time assembly.

Setting up the park in a sensible order

The supplied product information describes the transforming base and folding panels but does not include a numbered assembly manual, so work from the park's own design rather than assumed steps.

1. Clear a flat, wide surface: The park is 30 inches wide, so give yourself room to fold the side panels outward without knocking anything over.
2. Unfold the side panels: The side panels fold out as part of the transforming design. Open them fully before you start adding obstacles so the base sits flat.
3. Set the base to one of the 5 levels: Choose a level and lock in that shape first. Changing the base after you have placed ramps means repositioning everything again.
4. Place the ramps and obstacles: Arrange the included ramps and obstacles to suit the level you chose. There is no single correct layout, which is the point of a park creator.
5. Add the fingerboard: The set includes an exclusive The Berrics pro fingerboard, so you can skate immediately without buying a deck separately.

Choosing a level for the tricks you want to try

The 5 levels give you different base shapes, and the folding side panels change how the park edges behave. For a first session, pick a level that gives you a long, simple run-up to one ramp so you can repeat the same motion. Once that feels consistent, switch levels and see how the same fingerboard movement behaves on a different shape.

If you are new to fingerboarding, keep the park simple: fewer obstacles, more open floor. Add ramps as your control improves. The park is a build-your-own system, so a crowded layout is a choice, not a requirement.

Beginner fingerboard tricks worth practising first

The supplied information does not list specific tricks or a skill progression, so use these as general starting points that suit an open ramp layout.

• Push and roll: Place two fingers behind the deck and roll it forward into a ramp. Repeat until the board tracks straight.
• Ride the ramp: Approach a ramp at a steady speed and let the board travel up and back down. Consistency matters more than height at this stage.
• Flip and grind: Tech Deck describes its fingerboards as made for riding, flipping, and grinding. Try these on a low obstacle before moving to a bigger one.
• Change one thing at a time: Adjust your level or obstacle position, not both, so you can tell what caused a better or worse run.

Park Creator details that shape your setup

• Tech Deck, The Berrics X-Connect Park Creator: 30-inch-wide park with ramps and obstacles and 5 levels to transform the base, plus folding side panels. Explains why you need a wide flat surface and why the base should be set before placing obstacles.

  

• Tech Deck, The Berrics X-Connect Park Creator: Folds back into a container with a handle for storage and play on the go. Makes teardown part of the routine, so a layout does not have to be permanent.
• Tech Deck, The Berrics X-Connect Park Creator: Includes an exclusive The Berrics pro fingerboard. You can skate the park out of the box without a separate deck purchase.

Expanding the park with X-Connect ramps

The park is built to combine with other X-Connect compatible ramps, so you can extend the layout over time rather than replacing it. It also works with your existing Tech Deck fingerboard collection or Tech Deck BMX, each sold separately.

That compatibility is the main reason to plan your space before you buy more pieces. A 30-inch base plus extra ramps needs more room than the park alone, and the folding container only holds what came with it. If storage space is tight, add one compatible ramp at a time and test how the layout folds away.

Storage, price, and who this park suits

At USD 35.49 against a catalog comparison price of USD 49.99, the park sits in a reasonable range for a transforming playset that includes a fingerboard. The folding container with a handle is the practical value here: it turns a large park into something you can carry and put away.

Tech Deck positions its fingerboards and ramp sets as gifts for ages 6-8 who enjoy small toys, and as an alternative to toy cars. The park rewards kids who like building and rearranging as much as skating, since the 5 levels and movable obstacles are the core of the play. If your child mainly wants to ride a single ramp, a simpler set may be enough.

The supplied information does not confirm specific care instructions or the exact contents beyond the park and included fingerboard, so check the packaging for the full parts list before you plan a layout around a particular obstacle.